For laboratory research use only. Not for human or veterinary use. Read our research-use policy

Laboratory practice

Peptide reconstitution: concentration and volume math

Reconstitution turns a vial of lyophilised powder into a stock of known concentration. Everything that follows is arithmetic: one division for concentration, and a few conversions for volumes and syringe units.

Published 18 November 2026 · Last updated 18 November 2026

What reconstitution is, in laboratory terms

A lyophilised peptide vial holds a fixed amount of powder. Adding a measured volume of diluent produces a stock solution whose concentration is set by those two numbers. Because the vial amount is fixed, the diluent volume is the only thing you choose, and it decides every number downstream.

The equations

  • Concentration (mg/mL) = vial amount (mg) ÷ diluent volume (mL)
  • Micrograms per mL = concentration (mg/mL) × 1000
  • Volume for a target amount (mL) = target amount (mg) ÷ concentration (mg/mL)
  • Syringe units (U-100) = volume (mL) × 100, so one unit is 0.01 mL
  • Micrograms per unit (U-100) = concentration (mg/mL) × 10

Worked example

A 10 mg vial and 2 mL of diluent: 10 ÷ 2 = 5 mg/mL, which is 5,000 mcg/mL and 50 mcg per U-100 unit. For a target of 250 mcg (0.25 mg), the volume is 0.25 ÷ 5 = 0.05 mL, which is 5 units. The vial holds 10 mg ÷ 0.25 mg = 40 such volumes. Swap in your own numbers with the peptide reconstitution calculator.

Chart: concentration by vial amount and diluent volume

Concentration in mg/mL (mcg per U-100 unit) by vial amount and diluent volume
Vial amount1 mL2 mL3 mL5 mL
5 mg5 mg/mL (50 mcg/unit)2.5 mg/mL (25 mcg/unit)1.667 mg/mL (16.667 mcg/unit)1 mg/mL (10 mcg/unit)
10 mg10 mg/mL (100 mcg/unit)5 mg/mL (50 mcg/unit)3.333 mg/mL (33.333 mcg/unit)2 mg/mL (20 mcg/unit)
20 mg20 mg/mL (200 mcg/unit)10 mg/mL (100 mcg/unit)6.667 mg/mL (66.667 mcg/unit)4 mg/mL (40 mcg/unit)
30 mg30 mg/mL (300 mcg/unit)15 mg/mL (150 mcg/unit)10 mg/mL (100 mcg/unit)6 mg/mL (60 mcg/unit)

Read across a row to see how concentration falls as diluent volume rises. Each cell also gives the micrograms per U-100 unit, which is the number that links a syringe reading to an amount.

Choosing the diluent volume

The trade-off is measurement resolution. A small diluent volume gives a high concentration, so a target amount corresponds to a small draw volume, and a half-unit reading error is a large fraction of it. In the example above, 5 units has a half-unit (0.005 mL) graduation error of 10%. With 4 mL of diluent the concentration halves, the same target is 10 units, and the same half-unit error is 5%. A larger diluent volume therefore improves the precision of any one draw at the cost of a larger total volume, and the vial must be able to hold that volume.

The label amount is not always the peptide amount

The amount on a vial is the fill weight of lyophilised powder. The powder also contains counter-ions and bound water, so the net peptide content can be below 100%. If your result depends on the exact peptide amount, apply the correction described in net peptide content and stock solution concentration and check the batch Certificate of Analysis (how to read one).

Record what you made

Label each stock with the compound, vial amount, diluent and volume, resulting concentration and date. These five items let anyone recompute the stock later. For storage and handling of the lyophilised and reconstituted material, see storing lyophilised research peptides and how peptides degrade in the lab.

Tools

The calculator applies these formulas, shows a printable chart for your vial, and has a blend mode for two-compound vials. It converts the numbers you enter and does not suggest an amount.

Related

Further reading

Frequently asked questions

How do I calculate peptide concentration after reconstitution?

Divide the vial amount in mg by the diluent volume in mL. A 10 mg vial in 2 mL gives 5 mg/mL, which is 5,000 mcg/mL.

How many mcg is one unit on a U-100 syringe?

One unit is 0.01 mL, so one unit holds concentration (mg/mL) × 10 mcg. At 5 mg/mL that is 50 mcg per unit.

Does the vial label amount equal the peptide amount?

Not necessarily. The label states the vial fill; the powder also contains counter-ions and bound water, so the net peptide content can be lower. See the net peptide content article.