Documentation
Check the mass spectrometry on a COA yourself
A Certificate of Analysis states an observed mass. You can work out what the number should be in two lines of arithmetic. This page gives the formula, tables for common research peptides, and the shifts that signal degradation.
The formula
In positive-mode electrospray mass spectrometry a peptide picks up protons, and the instrument reports mass divided by charge. For a peptide of mass M carrying z extra protons:
m/z = (M + z × 1.00728) ÷ z
Take BPC-157, C62H98N16O22. Its monoisotopic mass from the formula is 1418.70 Da, so [M+H]+ is 1419.71, [M+2H]2+ is 710.36 and [M+3H]3+ is 473.91. A spectrum that shows peaks at those positions supports identity. A spectrum that shows nothing near them does not, whatever else the COA says.
Monoisotopic or average mass
Elements have naturally occurring heavier isotopes, mainly carbon-13, so a peptide appears as a cluster of peaks. Monoisotopic mass is that of the cluster's lightest peak (all C-12, H-1, N-14, O-16, S-32). Average mass weights every isotope by abundance. For small peptides a high-resolution instrument, for example an Orbitrap, resolves the lightest peak and reports monoisotopic values; for larger peptides the lightest peak is faint and results are usually reported as average or deconvoluted mass. A COA should say which it reports; if it does not, ask.
Small peptides: monoisotopic values
| Peptide | Formula | Mass (Da) | [M+H]+ | [M+2H]2+ | [M+3H]3+ |
|---|---|---|---|---|---|
| GHK (peptide alone) | C14H24N6O4 | 340.19 | 341.19 | 171.10 | 114.40 |
| KPV | C16H30N4O4 | 342.23 | 343.23 | 172.12 | 115.08 |
| Ac-LKKTETQ (the TB-500 fragment) | C38H68N10O14 | 888.49 | 889.50 | 445.25 | 297.17 |
| Ipamorelin | C38H49N9O5 | 711.39 | 712.39 | 356.70 | 238.14 |
| BPC-157 | C62H98N16O22 | 1418.70 | 1419.71 | 710.36 | 473.91 |
| MOTS-c | C101H152N28O22S2 | 2173.11 | 2174.12 | 1087.56 | 725.38 |
| Humanin | C119H204N34O32S2 | 2685.48 | 2686.49 | 1343.75 | 896.17 |
Masses are computed from the PubChem molecular formulas listed on each compound page, using monoisotopic atomic masses and a proton mass of 1.00728.
Larger peptides: average values and charge states
| Peptide | Formula | Average mass (Da) | [M+4H]4+ | [M+5H]5+ | [M+6H]6+ |
|---|---|---|---|---|---|
| Semaglutide | C187H291N45O59 | 4113.6 | 1029.4 | 823.7 | 686.6 |
| Cagrilintide | C194H312N54O59S2 | 4409.1 | 1103.3 | 882.8 | 735.9 |
| Tirzepatide | C225H348N48O68 | 4813.5 | 1204.4 | 963.7 | 803.3 |
| Thymosin beta-4 (N-acetylated) | C212H350N56O78S | 4963.5 | 1241.9 | 993.7 | 828.3 |
| Tesamorelin | C221H366N72O67S | 5135.9 | 1285.0 | 1028.2 | 857.0 |
Computed from the PubChem molecular formulas using average atomic masses. Instruments choose charge states by settings and sequence, so judge the whole pattern, not a single peak. Software that deconvolutes the series reports one neutral mass, which you can compare with the average mass column.
Shifts that signal a problem
- +15.995 Da per oxidised methionine. The shift is one oxygen atom (15.99 Da). MOTS-c has two methionines, so peaks at +16 and +32 Da indicate oxidation. Peptide degradation pathways covers this and the other common routes.
- Acetylation. An N-terminal acetyl group adds 42.011 Da. It is why Ac-LKKTETQ and LKKTETQ differ by that amount, and why the name of the molecule on a COA matters. See TB-500 vs thymosin beta-4.
- Deletions and truncations. A series of peaks below the main one, each lighter by the mass of one amino acid residue, suggests deletion sequences from synthesis. See peptide synthesis impurities.
- Counter-ions are usually not in the mass. A salt such as trifluoroacetate or acetate dissociates in the electrospray, so mass spectrometry does not report the salt form or the net peptide content. Those come from other tests (counter-ions in synthetic peptides, net peptide content).
What mass spectrometry cannot tell you
Identity by mass does not give purity: HPLC does, as the percentage of detected peak area. It does not give amount either: net peptide content does. Quality documentation for synthetic peptides typically combines several methods (NMR, mass spectrometry and chromatography for identity; HPLC and other methods for content and impurities) because no single result answers every question (McCarthy et al., 2023; Kuril et al., 2024). See peptide purity: HPLC and mass spectrometry and how to read a peptide COA.
Our own documentation
Batch-specific COAs from the supplier are not yet published on this site, so batch results read "Not yet provided" on the compound pages until they are. When they are, the observed mass will be checkable against the values on this page.
Related
- N- and C-terminal modifications and mass spectrometry
- How to read a COA HPLC chromatogram
- How to read an LC-MS trace: a worked peptide example
- HPLC vs LC-MS for peptides: identity and purity workflow
- Peptide purity vs peptide content: the other half of a COA
- Semaglutide vs tirzepatide: structure and expected m/z
References
- McCarthy D, Han Y, Carrick K, et al. (2023). Reference Standards to Support Quality of Synthetic Peptide Therapeutics. Pharm Res 40:1317-1328. PubMed 36949371 · DOI
- Kuril AK, Saravanan K, Subbappa PK (2024). Analytical considerations for characterization of generic peptide product: A regulatory insight. Anal Biochem 694:115633. PubMed 39089363 · DOI
- Wu LC, Chen F, Lee SL, et al. (2017). Building parity between brand and generic peptide products: Regulatory and scientific considerations for quality of synthetic peptides. Int J Pharm 518:320-334. PubMed 28027918 · DOI
- Erckes V, Streuli A, Chamera Rendueles L, et al. (2025). Towards a Consensus for the Analysis and Exchange of TFA as a Counterion in Synthetic Peptides and Its Influence on Membrane Permeation. Pharmaceuticals (Basel) 18. PubMed 40872554 · DOI
- Esposito S, Deventer K, Goeman J, et al. (2012). Synthesis and characterization of the N-terminal acetylated 17-23 fragment of thymosin beta 4 identified in TB-500, a product suspected to possess doping potential. Drug Test Anal 4:733-8. PubMed 22962027 · DOI
Frequently asked questions
How do I calculate the expected m/z of a peptide?
Divide the mass plus the added protons by the charge: m/z = (M + z × 1.00728) ÷ z. For a singly charged ion that is M + 1.007; for a 3+ ion it is (M + 3.022) ÷ 3.
Should a COA report monoisotopic or average mass?
It can be either, and it should say which. For small peptides, high-resolution instruments resolve the monoisotopic peak. For large peptides the isotope pattern is broad and average (deconvoluted) mass is common. Compare like with like.
What does a peak 16 Da above the main peak mean?
About +15.995 Da is the mass of one oxygen atom, the shift for one methionine oxidised to the sulfoxide. It indicates partial oxidation if the peptide contains methionine.